Golden Solar! Advance Power! Green Life!
● Pure sine wave solar inverter
● 300% surge power
● Smart remote control (RMT)
● Configurable AC/Solar input priority
● DC start & automatic self-diagnostic function
● Compatible with both linear & non-linear load
● Designed to operate under harsh environment
● Easy to install & easy to operate & easy to solve
● Low DC voltage supports home & office appliances
● Powerful charge rate up to 120Amp, selectable from 0%-100%
● High efficiency design & “Power Saving Mode” to conserve energy
● Battery priority mode, designates inverter-preferred UPS configuration
● 13 VDC battery recover point, dedicated for renewable energy systems
● 8 pre-set battery type selector plus de-sulphation for totally flat batteries
● 4-step intelligent battery charging, PFC (power factor correction) for charger
● 8ms typical transfer time between utility & battery, guarantees power continuity
● 15s delay before transfer when AC resumes, protection for load when used with generator
Model | MRC-1000W | MRC-2000W | MRC-3000W | MRC-4000W | MRC-5000W | MRC-6000W |
Continuous Output Power | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W |
Surge Rating | 3000W | 6000W | 9000W | 12000W | 15000W | 18000W |
AC Output | ||||||
Output Waveform | Pure sine wave/same as input(bypass mode) | |||||
Nominal Efficiency | >88%(peak) | |||||
Line Mode Efficiency | >95% | |||||
Power Factor | 0.9-1.0 | |||||
Nominal Output Voltage rms | 120/230VAC | |||||
Output Voltage Regulation | ±10% rms | |||||
Output Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | |||||
Short Circuit Protection | Yes( 10s after fault ) | |||||
Typical Line Transfer Time | 10ms(max.) | |||||
THD | <3% | |||||
DC Input | ||||||
Nominal Input Voltage | 12V | 24V | 48V | |||
Minimum Start Voltage | 10V | 20V | 40V | |||
Low Battery Alarm | 10.5V | 21V | 42V | |||
Low Battery Trip | 10V | 20V | 40V | |||
High Voltage Alarm | 16V | 32V | 64V | |||
Low Battery Voltage Recover | 13V | 26V | 52V | |||
Idle Consumption-Search Mode | < 25W when power saver on | |||||
AC Charger | ||||||
Input Voltage Range | Wide: 90~135VAC / 154~254VAC; Narrow: 100~135VAC / 184~254VAC | |||||
Output Voltage | Depends on battery type | |||||
Max Charge Rate | 35A / 70A | |||||
Battery Initial Voltage for Startup | 0-15.7V for 12V( *2 for 24V, *4 for 48V) | |||||
Over Charge Protection Shutdown | 15.7V for 12V (*2 for 24V, *4 for 48V) | |||||
Charger curve(4 stage constant current), battery types, 4 step digital controlled progressive charge | ||||||
Battery type | Fast V, float V ( *2 for 24v, *4 for 48v) | |||||
Gel U.S.A | 14 | 13.7 | ||||
A.G.M 1 | 14.1 | 13.4 | ||||
A.G.M 2 | 14.6 | 13.7 | ||||
Sealed Lead Acid | 14.4 | 13.6 | ||||
Gel Euro | 14.4 | 13.8 | ||||
Open Lead Acid | 14.8 | 13.3 | ||||
Calcium | 15.1 | 13.6 | ||||
De-sulphation | 15.5 for 4hrs | |||||
Remote Control | Yes. Optional | |||||
Bypass & Protection | ||||||
Nominal Voltage | 120VAC | 230VAC | ||||
Low Voltage Trip | 90V±4% | 184V/154V±4% | ||||
Low Voltage Re-engage | 100V±4% | 194V/164V±4% | ||||
High Voltage Trip | 140V±4% | 253V±4% | ||||
High Voltage Re-engage | 135V±4% | 243V±4% | ||||
Max. Input AC Voltage | 150VAC | 270VAC | ||||
Nominal Input Frequency | 50Hz or 60Hz (auto detect) | |||||
Low Freq Trip | 47Hz± 0.3Hz for 50Hz, 57Hz± 0.3Hz for 60Hz | |||||
Low Freq Re-engage | 48Hz± 0.3Hz for 50Hz, 58Hz± 0.3Hz for 60Hz | |||||
High Freq Trip | 55Hz± 0.3Hz for 50Hz, 65Hz± 0.3Hz for 60Hz | |||||
High Freq Re-engage | 54Hz± 0.3Hz for 50Hz, 64Hz± 0.3Hz for 60Hz | |||||
Overload Protection | Circuit breaker | |||||
Short Circuit Protection | Circuit breaker | |||||
Transfer Switch Rating | 30amp | 40amp | ||||
Bypass Without Battery Connected | Yes | |||||
Max. Bypass Current | 30amp | 40amp | ||||
Bypass Over Load Current | 35amp: alarm | 45amp: alarm | ||||
MPPT Charge Controller | ||||||
Rated Voltage | 12V | 24V | ||||
Rated Charge Current | 40A/60A | |||||
Rated Output Current | 15A | |||||
Self Consumption | < 10mA(at idle) | |||||
Bulk Charge | 14.5V(default) | 29.0V(default) | ||||
Floating Charge | 13.5V(default) | 27.0V(default) | ||||
Equalization Charge | 14.0V(default) | 28.0V(default) | ||||
Over Charge Disconnection | 14.8V | 29.6V | ||||
Over Charge Recovery | 13.6V | 27.2V | ||||
Over Discharge Disconnection | 10.8 V(default) | 21.6V(default) | ||||
Over Discharge Reconnection | 12.3V | 24.6V | ||||
Temperature Compensation | -13.2mV/°C | -26.4mV/°C | ||||
Ambient Temperature | 0-40°C(full load) 40-60°C(derating) | |||||
Mechanical Specification | ||||||
Display Status | Status LEDs / status LEDs+LCD | |||||
Inverter Dimensions(L*W*H) mm | 598*218*179 | 470*190*340 | ||||
Inverter Weight (KGS) | 21 | 23 | 27 | 38 | 48 | 48 |
Packing Dimensions(L*W*H) mm | 740*315*300 | 530*240*390 | ||||
Packing Weight (KGS) | 23 | 25 | 29 | 40 | 50 | 50 |