Golden Solar! Advance Power! Green Life!

RA Serires Solar Inverter/ Charger
RA series is a combination of inverter, AC charger with 300% surge power, AVR (Auto Voltage Regulation), Auto-transfer switch into one complete system.
Key Features
Parameter


Pure sine wave solar inverter

 

300% surge power

Smart remote control (RMT)

● Configurable AC/Solar input priority

DC start & automatic self-diagnostic function

Compatible with both linear & non-linear load

Designed to operate under harsh environment

Easy to install & easy to operate & easy to solve

Low DC voltage supports home & office appliances

Powerful charge rate up to 120Amp, selectable from 0%-100%

High efficiency design & “Power Saving Mode” to conserve energy

Battery priority mode, designates inverter-preferred UPS configuration

13 VDC battery recover point, dedicated for renewable energy systems

8 pre-set battery type selector plus de-sulphation for totally flat batteries

4-step intelligent battery charging, PFC (power factor correction) for charger

8ms typical transfer time between utility & battery, guarantees power continuity

15s delay before transfer when AC resumes, protection for load when used with generator



SOPOWER RA complete solar power system connection.jpg


 

ModelRA-1000W RA-1500W RA-2000W RA-3000WRA-4000W RA-5000W RA-6000W 
Rated Power1000W 1500W 2000W 3000W 4000W 5000W 6000W
Surge Rating(20s)3000W 4500W 6000W 9000W 12000W 15000W 18000W
Capable of Starting Electric Motor 1HP 1.5HP 2HP 3HP 4HP 5HP 6HP
AC Output
Output WaveformPure sine wave/Same as input (Bypass mode)
Nominal Efficiency>88%(Peak)
Line Mode Efficiency>95%
Power Factor  0.9-1.0 
Nominal Output Voltage rms100-110-120Vac / 220-230-240Vac 
Output Voltage Regulation ±10% RMS 
Output Frequency 50/60Hz ± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after   1sec) 
Typical Transfer Time  10ms(Max.)
THD < 10% 
DC Input
Nominal Input Voltage 12.0Vdc    (*2 for 24Vdc, *4 for 48Vdc) 
Minimum Start Voltage 10.0Vdc 
Low Battery Alarm 10.5Vdc / 11.0Vdc 
Low Battery Trip 10.0Vdc / 10.5Vdc 
High Voltage Alarm & Fault 16.0Vdc 
High DC Input Recovery 15.5Vdc 
Low Battery Voltage Recover  13.0Vdc
Idle Consumption-Search Mode < 25 W when Power Saver On 
AC Charge
Input Voltage Range Wide: 90~135VAC / 154~254VAC; Narrow:   100~135VAC / 184~254VAC 
Output Voltage Depends on battery type 
Charger Breaker Rating 10A 10A 10A 20A 20A  30A 30A
Max Charge Rate 35A / 70-90A Max (Charger Current Control) 
Over Charge Protection Shutdown 15.7V for 12Vdc (*2 for 24Vdc, *4 for   48Vdc) 
Charger Curve (4 stage constant current) 4 step digital controlled progressive charge)

Battery Type   

 (*2 for 24Vdc, *4 for 48Vdc) 

Fast   Vd Float Vdc 
Gel U.S.A 1413.7
A.G.M 1 14.113.4
A.G.M 2 14.613.7
Sealed Lead Acid 14.413.6
Gel Euro 14.413.8
Open Lead Acid 14.813.3
Calcium 15.113.6
De-sulphation 15.5 for 4hrs 
Remote Control  Yes. Optional
Bypass & Protection
Input Voltage Waveform Sine wave (Grid or Generator) 
Nominal Voltage 120Vac 230Vac 
Low Voltage Trip 80V/90V±4% 184V/154V±4% 
Low Voltage Re-engage 90V/100V±4% 194V/164V±4% 
High Voltage Trip 140V±4% 253V±4% 
High Voltage Re-engage 135V±4% 243V±4% 
Max. Input AC Voltage 150VAC 270VAC 
Nominal Input Frequency 50Hz or 60Hz (Auto detect) 
Low Freq. Trip 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz 
Low Freq Re engage 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz 
High Freq. Trip 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz 
High Freq. Re-engage54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz 
Output Short Circuit Protection Circuit breaker 
Bypass Breaker Rating 10A 15A 20A 30A 30A  40A 40A 
Transfer Switch Rating 30amp   for UL & TUV  40amp for UL
Max. Bypass Current 30amp 40amp
Mechanical Specification
Display Status LEDs / Status LEDs+LCD 
Mounting Wall mount 
Inverter Dimensions(L*W*H) mm382*218*179442*218*179598*218*179
Inverter Weight (KGS)16172024354545
Packing Dimensions(L*W*H) mm520*315*300580*315*300 740*315*300
Packing Weight (KGS)18192226374747